{$cfg_webname}
主页 > 机械机电 > 机械 >

安全阀测试系统设计(含CAD图)

来源:56doc.com  资料编号:5D21973 资料等级:★★★★★ %E8%B5%84%E6%96%99%E7%BC%96%E5%8F%B7%EF%BC%9A5D21973
资料以网页介绍的为准,下载后不会有水印.资料仅供学习参考之用. 帮助
资料介绍

安全阀测试系统设计(含CAD图)(任务书,开题报告,外文翻译,进展表,论文说明书9000字,CAD图11张,答辩问题)
摘要
安全阀是启闭件,当所在设备或者管道的介质压力升高超过规定值时,通过向系统外排放介质来防止管道或者设备内介质压力超过规定数值的特殊阀门。安全阀对人人身安全和设备运行起到重要的保护作用,安全阀必须进过压力试验才能使用。
本文主要设计安全阀测试系统。安全阀的测试有离线测试和在线测试两种基本方式,本文选择设计离线测试系统。主要工作内容首先了解离线测试的方式和步骤,进行对安全阀测试工作台的设计,主要包含圆盘、卡爪、动力系统的设计、导轨、卡爪运动机构等。
关键词:安全阀离线测试工作台
ABSTRACT
Safety valve is open and close cases, when where the equipment or pipeline medium pressure increases exceed the prescribed value by medium to the outside of the system discharge to prevent pipeline or equipment in the medium pressure exceeds the set value of special valves. Safety valve for all personal safety and equipment operation plays an important role in the protection, the safety valve must be in the pressure test to use.
In this paper, the design of the safety valve test system. The test of safety valve has two kinds of basic ways, off-line test and on-line test. The main work of the first to understand the way of off-line testing and steps, the design of the safety valve test bench, mainly contains the disc, the card claw, the power system design, guide rail, the movement mechanism, etc..
Key words: Safety valve OfflinetestBench
 

安全阀测试系统设计(含CAD图)
安全阀测试系统设计(含CAD图)
安全阀测试系统设计(含CAD图)


目录
摘要    II
ABSTRACT    III
目录    IV
第一章概述    1
1.1安全阀定义和发展    1
1.2安全阀分类    2
1.3安全阀的性能参数介绍    4
第二章安全阀测试系统    6
2.1离线测试    6
2.2安全阀在线校验技术    7
第三章设计安全阀测试系统    9
3.1离线校验内容的认识    9
3.2安全阀整体结构设计    9
3.3安全阀测试系统详细结构的设计    10
3.3.1准备和分析    10
3.3.2液压缸的选用    11
3.3.3平台的设计    12
3.3.4夹具的具体设计    15
3.4.5导轨和夹具运动机构的设计    16
3.4控制系统简析    17
结语    18
参考文献    19
致谢    21

推荐资料