{$cfg_webname}
主页 > 理工学 > 生物科学 >

芒类生物质切割物理特性研究

来源:56doc.com  资料编号:5D11324 资料等级:★★★★★ %E8%B5%84%E6%96%99%E7%BC%96%E5%8F%B7%EF%BC%9A5D11324
资料以网页介绍的为准,下载后不会有水印.资料仅供学习参考之用. 帮助
资料介绍

芒类生物质切割物理特性研究(含选题审批表,任务书,开题报告,中期检查表,毕业论文16000字)    
摘  要:大量的能源需求和减少对石化石油的依赖,是世界上共同面临的挑战。芒类生物质的利用是未来生物能源的主要利用方向之一,本试验采用湖南农业大学试验园种植的芒草为材料,以湘杂芒2号、湘杂芒3号、芒/南荻杂交种、2年生南荻无性繁殖苗和3年生南荻种子苗5个品种的芒草为试验对象。在切割试验中针对每类芒草茎秆分别采用不同切割位置,不同切割刀具,不同切割方式和不同切割速度,从切割力,应力,剪切强度三方面分析芒类生物质切割物理特性,得出切割不同芒草茎秆的最大切割力和最有效切割方式。从而为加工机具和加工工艺的设计、改进提供基础数据和理论依据,为设计芒草收割、切碎机械设备时提供有效的参考和理论支持。
关键词:芒草生物质;芒草;茎秆;机械特性;显著

The Study on the Tall Grass Biomass Cutting Physical Properties
Abstract:To cutting down the huge demand on energy and the rely on the fossil oil is the challenge which the world faced. To take advantage of the Miscanthus Biomass is part of bioenergy in the future. This experiment is to use the miscanthus sinensis nurtured by Hunan Agricultural University’s test garden, Taking Xiangzamang NO.2, Miscanthus/Nandi cenospecies, biennial Nandi apogamic seedling and triennial Nandi seeding bud as experimental subjects. In the cutting experiment, for each type of Miscanthus straw use of different cutting positions, different cutting tools, cutting different ways, and different cutting speed, from cutting force,cutting stress,shear strength three aspect analysis the tall grass biomass cutting physical properties, and obtaining the largest cutting force and the most effective cutting method of each Miscanthus straw. So this experiment can provide basic data and theoretical basis on design of processing equipment and improve the technology,and provide effective reference resources and theory support on design of harvesting machinery and shredding machine.
Key words: Miscanthus Biomass; Miscanthus; Stalk ; echanical properties ; otability

 

芒类生物质切割物理特性研究


目    录
摘要…………………………………………………………………………………………1
关键词………………………………………………………………………………………1
1  前言……………………………………………………………………………………2
2  问题的提出及国内外现状分析………………………………………………………3
    2.1  芒草的经济价值………………………………………………………………3
    2.2  研究目的………………………………………………………………………3
    2.3  国内外研究现状………………………………………………………………4
2.4  目前需解决的问题……………………………………………………………5
2.4.1  芒草实验植株选择问题…………………………………………………5
2.4.2  测量数据的精确问题……………………………………………………5
2.4.3  数据采集后的科学分析…………………………………………………5
3  实验内容………………………………………………………………………………6
3.1  试验样本的采集以及材料的选取………………………………………………6
    3.1.1  试验样本采集……………………………………………………………6
    3.1.2  实验材料的选取…………………………………………………………6
    3.1.3  实验需测量数据…………………………………………………………6
3.2  实验设备…………………………………………………………………………7
3.3  夹具设计…………………………………………………………………………7
3.4  试验原理与方法…………………………………………………………………8
3.5  试验结果…………………………………………………………………………8
3.5.1  五种芒草的分阶实验数据方差分析……………………………………8
3.5.2  切割速度的影响………………………………………………………12
3.5.3  直径的影响……………………………………………………………13
3.5.4  节点的影响……………………………………………………………16
3.5.5  含水率的影响…………………………………………………………17
3.5.6  正交试验………………………………………………………………18
4  讨论与分析……………………………………………………………………………29
5  结论……………………………………………………………………………………29
参考文献……………………………………………………………………………………30
致谢…………………………………………………………………………………………31
 

推荐资料